Need to monitor and track mobile and towable generators? Power Telematics has you covered.
The rental generator market is constantly on the move, and it is imperative to keep tabs on these units at all times. Whether you need to know where the generator is or if it shuts down can be absolutely critical to keeping businesses, healthcare facilities, and more up and running.
The PTM Series solutions are your go to choice for mobile generator monitoring and tracking. With universal compatibility, these solutions will work on ANY generator brand/make/model regardless of age. The PTM Series monitors are installed inside the enclosure and include a roof-top mounted Cellular/GPS combo, dome style antenna that will track the location of the equipment and provide immediate alerts on generator activity. All generator events are logged and reported to the Power Link online portal. Best of all, the PTM Series monitors are backed by a lifetime warranty.
All PTM Series monitoring systems track the location as well as a set of standard conditions from each generator set including:
- Generator On/Running
- Generator Off/Stopped
- Battery Level Monitoring
- Low Battery Alarm
- Engine Hours Tracking
- Daily Generator Status Checks
The PTM Series monitoring systems include a set of digital inputs used to monitor additional alarm conditions from the generator controller and work in conjunction with our optional accessory kits. Depending on the controller the monitor is connected to, these inputs can be programmed to track alarms including, but not limited to:
- Common Fault
- Common Warning/Pre-Alarms
- Low Fuel Level
- Generator Switch Not in Auto/Switch in Auto
- Low Coolant Level
- Low Coolant Temperature
- High Engine Temperature
- Low Oil Pressure
- Over Speed
- Over Crank
- Fuel Leak Detected
- & Many More!
PTM Series Mobile Generator Monitoring Products
PTM350 Monitoring System
Recommended Applications: Any portable/towable generators.
The PTM350 mobile generator monitoring system is a full featured solution for ANY portable/towable generator. The PTM350 is installed on the generator set, inside the enclosure. This monitor includes a custom wiring harness that can be installed on any brand/make/model generator and has four (4) programmable bias inputs and two (2) analog inputs. These inputs are used to monitor additional alarm conditions from the generator controller and work in conjunction with our optional accessory kits. This system is equipped with a multi-carrier modem to connect to the best available network in the area and has a roof-mounted cellular and GPS antenna. All generator events are logged and reported to the Power Link online portal. Best of all, the PTM Series monitors are backed by a lifetime warranty.
All monitors include the first 12 months of monitoring service.
Monitor Features Include:
- PTM350 Monitoring System
- Roof-Mounted Cellular & GPS Combo Antenna
- Multi-Carrier Modem & Connection
- Over-The-Air Unit Configuration and Updates
- Custom Wiring Harness Equipped with
- Battery + & – Leads
- Ignition Lead
- 4 Digital Inputs w/ 4 Ground Leads
- 2 Analog Input
- 3 Relay Driver Outputs
- Internal 1000mAh Lithium Ion Battery
- Remote Start/Stop Capable
PTM400 Monitoring System
Recommended Applications: Any portable/towable generators.
The PTM400 is best recommended for generators with multi-output controllers to maximize alert capability as well as use of optional accessory kits.
The PTM400 mobile generator monitoring system is a full featured solution for ANY portable/towable generator. The PTM400 is installed on the generator set, inside the enclosure. This monitor includes two custom wiring harnesses that can be installed on any brand/make/model generator and has seven (7) programmable bias inputs and four (4) analog inputs. These inputs are used to monitor additional alarm conditions from the generator controller and work in conjunction with our optional accessory kits. This system is equipped with an LTE modem and has a roof-mounted cellular and GPS antenna.
All monitors include the first 12 months of monitoring service.
Monitor Features Include:
- PTM400 Monitor – Fully Configured & Scripted
- External Cellular & GPS Antenna – Roof Mount
- Power Harness and Custom I/O Connection Harness
- 7 Digital Inputs
- 4 ADC Inputs
- 5 Relay Driver Outputs
- 12-24VDC Power
- Internal 1000 mAH Lithium Ion Battery
- Cellular Carrier Activation with Verizon or AT&T
- Remote Start Relay Driver Output (Customer Furnished Relay)
Power Telematics also offers optional accessory kits to complete and customize your monitoring experience.
Kits include:
Generator Voltage Detection Kit
This sensor is used to detect the presence of generator voltage when the generator is running. The sensor is placed on the output side of the generator breaker.
Additional Conditions Monitored:
- Generator Breaker Open
- Generator Voltage Detected
Generator Current Sensing Kit
This sensor is used to detect if current is present or “flowing” from the generator set. The sensor is installed/clamped on either side of the main line circuit breaker. If current is present, then the generator is supplying load to the building.
Additional Conditions Monitored:
- On Generator Power
- Return to Utility Power
Diesel Fuel Level Monitoring
The Ultrasonic Diesel Fuel Level Sensor is a programmable plug and play device used for diesel tanks. Using ultrasonic waves, this sensor measures fuel level for tanks up to 7′ reporting fuel level from 0-100%. Standard kit comes in 30′ cable length.
Provides Alerts for:
- Fuel Level Below 50%
- Fuel Level Below 25%
- Fuel Level Below 10%